21 Feb

Guide To Common Rail Wiring For Model Toys Electric Train Sets

For those interested in model toys, particularly that of the model train, one thing they will inevitably come across when commencing their hobby is the issue of how to wire their railway.

One of the most popular ways to do this is through the device called common rail wiring, the basic concept of which lies in always insulating the same piece of rail, while leaving the other one still connected. Sketch and/or draw a layout of your system that shows the dual tracks while marking the outer and inner rails as plus and minus respectively. In the example of an oval track layout, this means that the outer rail will always be positive no matter where it goes, and the inner rail will therefore also always be negative. The benefit of this is, once you have insulated the inside rail on every siding (even those controlled via on-off switches), the outer rail therefore becomes akin to common ground, while the inner rail resembles hot switched lead. This is why this method has become known as common rail wiring for the model train. Two different power packs are recommended for this system, both insulated from each other (such as in the cases where an oval is inside an oval), as they can then have the ability to control different areas of the layout in the same instances. Both packs need at least one wire to be attached to the common rail, with a second to go to either the insulated rail of the oval or to the sidings in order to be controlled.

The common rail system is a very popular one, primarily because it enables the system to pass on control from one of the packs to the other, with the model train on the track thus gaining power from the right side of the front truck at the same time as it is getting it from the left side of the rear truck. Minus the common rail, the model train would otherwise regard the insulated joint as a malfunctioning switch and would thus then just stall on the track. Just be prepared for the possibility of the model toys surging unexpectedly fast when crossing over the joint!

One last point remember to double insulate on the section of the track where you require the train to reverse back on itself this means that the positive rail will suddenly run smack bang into a negative rail, and thus an insulating gap and plastic joiner are essential here. A DPDT (double-pole, double-throw) switch will be required for this operation.

Aside from this, however, the common rail wiring should be the best solution for your model train toys system.

19 Feb

Bicycling Is A Popular Mode Of Transportation In San Luis Obispo

San Luis Obispo, located midway between Los Angeles and San Francisco, is one of the best cities for cycling in the United States. Although there are only 45,000 people in San Luis Obispo, the city was recently ranked by the League of American Bicyclists as a silver level bicycle friendly community thanks to its focus on education, encouragement, engineering, and evaluation. There are only eight cities in America with a higher overall ranking.

Residents can enjoy a wide range of recreational cycling paths throughout the city–from biking through historic San Luis Obispo to cycling through the Edna Valley Wineries–while also being able to commute safely thanks to having bike paths or bikeways on nearly every single arterial street. The city has also recently updated the Bicycle Transportation Plan and intends to spend another $53 million in projects for 31 miles of new bike paths and six major bikeways.

However, as with any form of transportation, there are risks involved while biking in San Luis Obispo. In 2006, there were over 50 reported bike accidents, including one fatality. If you want to stay safe while cycling in San Luis, the city has over 14 League Cycling Instructors offering bi-monthly Road 1 classes.

These classes will not only show you the basics you need for commuting by bike, but they will also teach you valuable lessons on avoiding bike accidents. A few things you’ll learn include:

-Preparation: How to maintain your bicycle, use safety gear, and prepare for your ride so you can reduce your risk of a bike accident while cycling in any weather.
-Technique: Tips for changing gears, braking, and observation so you can ride safely on a regular basis.
-Cycling in Traffic: General instructions on the rules of the road and tips for avoiding bike accidents while riding in San Luis Obispo.

Although there are risks to cycling, it truly is one of the safest forms of transportation and is becoming more popular with each passing year. By following the rules of the road and practicing defensive riding tactics, you’ll greatly decrease your chance of being in a bike accident in San Luis Obispo.

If you are ever involved in a bike accident in San Luis Obispo and believe you are not at fault, you should contact a personal injury lawyer for a free consultation. An experienced attorney specializing in bike accidents can help you assess, file, and win your personal injury claim so you can recover the full compensation the law and circumstances allow.

15 Feb

Ameriquest Transportation Services Names Three New Vice Presidents For Its Strategic Fleet Planning

Press Release – Announcements reflect the growth and expansion of the company’s asset management solutions.

CHERRY HILL, NJ – AmeriQuest Transportation Services, a leading provider of comprehensive fleet management services, names three to the position of Vice President of Financial Services. All three will report to Patrick Gaskins, Group Vice President of AmeriQuest.

Gary Griffin was previously Vice President of Business Development for CURE Leasing & Maintenance, a wholly-owned subsidiary of AmeriQuest Business Services, and a provider of financing and maintenance services to companies using independent contractors as part of their transportation program. Griffin has more than 34 years of experience in the transportation and truck leasing industry. Prior to joining CURE, Griffin served as Director of New Business Development – National Accounts with Ryder System Inc. He has also held sales leadership positions with Freightliner Market Development Corp., GE Transportation Services Group, Penske Truck Leasing, and McDonnell Douglas Truck Leasing.

Mike Williams, who has ten years of transportation industry experience, joined AmeriQuest Transportation Services in 2010 as Director of Sales for the South Central Region, and was promoted to Senior Director of Sales in 2014. Prior to joining AmeriQuest, Mike held business development roles with Ryder System, Inc. and United Rentals.

Brian Benicewicz recently joined AmeriQuest, and is a 13-year veteran of the transportation industry, with an expansive background in the transportation and material handling equipment segments for Fortune 500 companies. Prior to joining AmeriQuest, Benicewicz worked for Cowan Systems, a full service transportation and logistics company with operations through the U. S.

“Our customers are looking for more than just financing options,” said Group Vice President Gaskins. “In today’s highly competitive business environment, companies need to understand what their fleets are actually costing them, and how to manage them more effectively and efficiently. That’s why we offer our customers asset management and fleet planning recommendations based on their own fleet’s data, in addition to a variety of flexible financing options that best meet their specific needs. With the addition of Gary, Mike, and Brian, we’ve added to our already experienced team that will help our customers focus on growing their businesses.”

About AmeriQuest Transportation Services
AmeriQuest Transportation Services, the fleet management division of AmeriQuest Business Services, Inc., is a leading provider of comprehensive fleet management services. By leveraging the strength of more than 700,000 vehicles, AmeriQuest delivers savings, expertise, and opportunities to its private fleet and truckload carrier members. AmeriQuest provides procurement, asset financing and remarketing, and outsourced transportation management services such as full service leasing, dedicated logistics, and contract maintenance.

More information can be found at .

12 Feb

Principles Of Training

The sport principles of training are aimed at helping you understand the training process and allowing you to plan your training so you see a steady upward progression in results.

Specificity making sure your training is specific to what you are hoping to achieve. Simply put, dont spend all your time doing sprint training sets if you want to improve your long-distance cycling!

Progression the body adapts to increased training loads and this will result in improved fitness levels and competitive performance.

Overload training at a level that will push you. If you are always training at the same intensity and at the same speed you will not see the progression you would hope for. You need to be constantly overloading your muscles and cardio respiratory system to improve your strength and fitness level.

Reversibility if you dont train or you decrease your intensity then you will see your fitness levels drop and as a consequence so will your overall performance. If you are unwell and are unable to train for an extended period then you will notice a reduced performance level when you start training again.

Tedium Keeping the training interesting. If you find yourself getting bored then you are less likely to want to train and your motivation levels will automatically drop, which can lead to a reduced effort level and even the likelihood of skipping training sessions. This will lead to Reversibility occurring.

When you start to plan your training programme you can use the FITT principles to work towards SPORT. For instance, to make sure that the SPORT principles of Progression and Overload are always occurring you can increase the Frequency of your training sessions, the intensity of each session or the Time you spend training.

Frequency how often you train.
Intensity intensity you train at.
Time how long you train for.
Type which training methods you are using.

To stop Reversibility occurring rapidly you reduce intensity if feeling sick. To avoid the SPORT principle of Tedium you can change the Type of training methods you are using. It is advisable that you only change one aspect of the training at a time rather than changing everything otherwise it can be too much for your body and may lead to an injury occurring.

12 Feb

Budget Options To End Your Europe Transportation Woes

Often, transportation within countries or from country to country in Europe, stacks up the biggest expense during Europe tour packages. The cost of air, bus and train travel can be quite daunting to most travellers. However, it is possible to enjoy a trip around Europe without emptying your bank balance in the process. Here are some great budget options to end your transportation woes:

By Air: Budget Airlines

There are a number of great options when it comes to booking budget flights. As there is stiff competition in the European market, getting a flight ticket for cheap is a very real possibility.

There are companies like Ryanair, Transavia, Vueling and EasyJet that offer great deals on flights between different popular destinations. If youre lucky, you may even bag a flight ticket that requires you to pay no more than taxes. Jetsetting across the continent is no longer a dream for budget travellers, as long as you plan and book well in advance. Make sure to book your tickets at least one month before your actual travel date so you can get a fantastic deal. Watch out for sales and other offers online on travel and ticketing portals, especially during the off season when fewer people are travelling, making airlines more agreeable to providing you a ride at an easily affordable price.

By Bus: Eurolines
All international bus travel services in Europe come under the purview of Eurolines. While each country may have its own national bus services for travelling from destination to destination within its borders, to travel from one country to another, you can avail of Eurolines buses. Bus travel is much cheaper than train travel in Europe, making it an affordable transport option. Of course, it has its cons too, buses dont provide as much room per passenger as trains and youre stuck in your seat unless the bus makes a stop. Still, the savings more than make up for it. Its a great option to use when youre on a tight budget and not particularly restless. Besides, you also get to pass right through cities and towns, giving you a glimpse of how life is lived in different places.

By Train: Eurail Pass
If youre going to be travelling a really long distance, a train would be a better option than a bus. But dont worry, there is a budget tip that you can use to prevent spending too much while travelling by rail. A rail pass is your golden ticket to save on train ticket fares. While short distances cost less and overnight journeys a good deal more, a rail pass lets you save on both kinds of tickets. A pass is often valid to cross into certain provinces of neighbouring countries too, so you can use it to travel both within individual countries or multiple countries during your Europe tour.

12 Feb

Advantages And Disadvantages Of Intermodal Freight Transportation

Intermodal freight transportation involves moving freight by using two or more modes of transportation. Typically, transportation modes include truck, railroad and steamship. Although transportation by air also is possible, the method is costly. Intermodal freight transportation positively influences our global economy by controlling the way we move our goods. Nevertheless, some factors need to be kept in consideration to avoid restricting the value of intermodal fright transportation.

A truck moves an empty container to the shipper. The shipper loads the container with goods. The truck transports the loaded container to port. At the port, the container is loaded onto the steamship, which is forwarded to the port of destination. The container is driven to the warehouse of the receiver shortly after being discharged at the port of destination.

Intermodal freight transportation gives you flexibility with how you want to move your freight. Additionally, you have the opportunity to be creative in finding the most efficient way to move your freight. Generally, this process involves at least two modes of transportation. The more efficiently you plan, the more money you will save.

Intermodal freight transportation may be costly depending on the number of modes of transportation. Some downfalls to intermodal freight transportation involve the high costs that are associated with moving freight by using several types of modes of transportation. Lack of communication and idle time of equipment will increase transportation costs. Similarly, equipment that moves from one location to another empty also adds to the costs.

A supply chain is defined as three or more organizations that are directly linked upstream or downstream in the flow of products or services as they move from the source to the customer. Intermodal freight transportation plays a major role in enabling organizations in a supply chain to respond to market changes by providing them with options. Organizations within a supply chain use intermodal freight transportation to cooperate and assist each other in maximizing profits. This cooperation is achieved by sharing information and communicating their needs to each other.

10 Feb

Out And About In Missouri Transportation And Car Services

Getting around a new city like Missouri can be an exciting and memorable experience, but it can also be a disaster. Stressing and worrying how to get to your next destination can easily turn your simple trip or vacation into the most confusing ordeal you have ever encountered. Good thing there are affordable transportation from and to Missouri Airport.

Imagine yourself all packed and ready to experience a new place and explore all its culturemuseums, parks, restaurants, shops and mallsbut instead of smoothly walking through these places, you end up stuck in your hotel room trying to figure out the fastest yet cheapest way to go about your trip. What is the most sensible approach to solving this predicament? Book yourself a transport service.

Booking yourself a transport service that will be ready to drive you around and anywhere in the city is still the best option when visiting either for leisure or business. From the moment you arrive, you can smoothly hop into your limo transportation in Missouri and get to where you need to be in a matter of minutes. Local transport services have chauffeurs who are professional, courteous, and knowledgeable about the roads and areas in the city, so you can be sure to make your appointment on time.

When in Missouri, one must not pass the chance to take a trip to Saint Louis, one of its most beautiful and interesting cities filled with cultural vibe, music, and arts. Cap the night by riding in one of Saint Louis limousine service and have dinner in one of its many world-class restaurants, and get to taste regional cuisine like toasted ravioli, gooey butter cake, Provel cheese, and of course, one must not leave out St. Louis style pizza!

Whether you are planning a big event, an intimate occasion or attending a seminar, business convention or just treating yourself and friends to a get-away, transportation is key to ensuring you have a good time and hassle-free trip. Arranging to get the best Missouri limousines is easy, affordable, and most of all suited to your transportation requirements. Limo and car companies have a wide fleet ranging from limo buses, luxury sedans, and sporty SUVs. You can be sure to get the proper vehicle you need for your event or occasion. The best limousine services are chauffeured with professional, dependable, and polite drivers that make your vacation or trip even more pleasant and worry-free.

In Missouri, travelling in style does not always have to be costly. There are hundreds of affordable transportation and car services rentals where you can have the best options possible. Most of all, you do not need to waste your precious time trying to find your way through the city. Getting yourself a limo or car service will guarantee that you get the most of your trip and get to see the real interesting urban scenes and cultural offerings of Missouri.

9 Feb

Guide To Wiring Model Train Toy Track Layouts

A train toy is a key piece of any childhood. Thus, it is important to master the wiring of toy model trains to ensure they run as smoothly as possible. This way, your child can enjoy hours upon hours of great fun. Don’t worry: Even if you have little experience with wiring, you can definitely master this with a little practice. The following includes a basic guide to wiring model train toy layouts.

Before you begin, you should know that the larger your model train track is, the more complex wiring and set-up will be. Additionally, you may need to use a heavy gauge wire as a bus for the track and may also have to run a number of feeders. Experts recommend that you fasten your train track to a foundation so that it is as secure as possible. Plywood is generally an inexpensive and effective material to use for this.

One of the keys to wiring model train tracks is to keep track of which wire is which. Using different-colored wire is a great way to keep track of your wiring patterns. For example, you could have the outside rail wires be red and the inside ones white to mark the negative charge.

Most experts agree that the right hand rule of wiring is integral to a successful track layout. Basically, you want the train to travel the track layout to the right or counterclockwise direction from where you stand at the power pack. When wiring, this means that the outside rail would be positive (+) and the inside rail would then be a negative (-) rail. It’s important to keep in mind which rails are positive and negative so that wiring is made that much easier.

You can wire the toy train wires to the model’s track in a number of ways. The most popular way is to solder feeder wires to the outer side of your rail. An 8 place terminal block is a great way to keep track of your wires. For example, you can connect all of the wires here and keep yourself from doubling up wires in a power pack. You don’t want the vibration from the pack to result in loose or frayed wires. Attaching the wires from the pack to the block is easy: all you have to do is strip some of the insulation from the wire, loop it around one of the knobs or screws of the terminal, and match up the charges.

Beginners should start simple so that they can master the basics of wiring and soldering. Once you master a simple model train toy track layout and its wiring, you can start experimenting with more and more complex layouts and their wiring. Soon, you’ll have many trains running on interlocking and reversing loops of track.

27 Jan

High-quality Nuchi Wooden Train Sets

A wooden train set is a great gift any time of the year and has a way of transforming a child’s play in a way that few other toys can. A classic interactive toy, wooden train sets encourage open-ended play, a feature missing from many of today’s battery-operated toys. Kids respond to their own creativity and thought rather than following the prompts of a computer chip.

Another key feature of wooden train sets is that play can be either cooperative or independent. If a child plays alone, he is instantly in charge of the train yard. He assigns duties to each train car, decides how to layout the track, and makes the whole operation go. If he is playing with siblings or friends, play becomes a team activity.

The Swiss psychologist Jean Piaget noted that kids learn through play. Trains are exceptional learning toys. Playing with a wooden train set is not just a fun activity or a way to pass the time. The time spent at play is critical to a child’s development. For example, watch your son play with a wooden train set. His fine motor skills develop as he manipulates the track and moves the train cars. His speech develops as he talks to each train and decides the job for each piece. His social skills develop as he plays cooperatively with others.

Nuchi is quickly gaining a solid reputation for quality and design. While most wooden train sets are designed for children aged 3 and up, Nuchi has several sets and pieces designed for children 2 and up.

First Jungle Train Set:
The Nuchi Baby’s First Jungle Train Set is designed for children 2 years and older. The jungle train cars are larger than train cars in traditional starter sets. And the Jungle Train Set contains just a few pieces of track so as not to frustrate. The set includes: Elephant car, Tiger car and Alligator car; Soft forest tunnel and 10 pieces of track.

Big Railway Set:
Nuchi Big Railway Set makes a wonderful gift. The set includes a stunning bridge and a forest-themed tunnel. The wooden railway set has 36 pieces including: 5 train cars (including 2 engines); 2 cars; bridge; the tunnel; and road crossing.

Oval Train Set:
The Nuchi Oval Train Set is great starter kit for the young train buff. It includes 3 train cars and one automobile for rolling fun, plus 11 pieces of track.

27 Jan

Benefits of Train the Trainer

To make the business successful it is very important to have the fully trained staff. If the employees of the company are not trained then can’t bring profits to business. So it becomes very important for the organization to train their staff about each and every aspect. To train the staff occurs the requirement for the trainer. But it very important to train the trainer as daily new technology is evolved and they should be properly updated on it. Special training sessions are held for the trainers so that they can deliver the best training to the employees. The company sends the trainers to the attend training and sessions and when they return back, certain time is set so that they can share their knowledge with the trainees. Train the Trainer sessions is very important as they can help the trainers to acquire new set of skills so that they can deliver best knowledge to the trainees. It not only benefits the individual but also helps in professional development for the person. Basically there are two types of skills required by the trainers. First, they need to have the in depth knowledge of the subject and secondly they should have the ability to deliver the knowledge to trainees or employees in right manner. Training is not just delivering the knowledge; it is basically organizing the knowledge and then transferring it to the trainees. There are also certain body language techniques which the trainers should understand while delivering the session to the trainees. There are special workshop conducted for the train the trainers that can help them to deliver the best. There are many companies that offer the train the trainer course which can customize according to the requirement of the company. Organization can search online various sessions that are specially scheduled for the trainers.

There are certain benefits that can be acquired after the training session:

1. The level of the confidence is increased when they acquire certain set of knowledge.

2. Their learning and grasping power increases.

3. They work more efficiently and effectively.

4. They are able to handle the teams properly.

5. The level of job satisfaction also increases which helps them to remain with the organization for long period of time.

6. They are more developed on the professional level.

7. The cost is also reduced as only one person is sent for training rather than all employees.

Resource Box:The author has discussed about the Trainer training in this particular article. He is explaining the benefit of Train the Trainer.